Certified safe and reliable: with approvals from KC, UL508, and, in particular, GL, the WAGO-I/O-SYSTEM 750 XTR is well equipped for applications in the maritime industry.
The WAGO-I/O-SYSTEM 750 XTR is the automation system for extreme demands. Shipping and the entire offshore sector should be included, without doubt, among the most stressful environments. Thus, it is no surprise that the 750 XTR Series has already received approvals from Germanischer Lloyd, Underwriters Laboratories, and the National Radio Research Agency (RRA, South Korea). Temperatures between -40°C and +70°C, vibrations up to 5 g, and EMC stability according to EN 60870-2-1 — the WAGO-I/O-SYSTEM 750 XTR is made to meet your difficult challenges. Expensive special solutions, like air conditioning and protection circuits, are no longer needed.
Extreme Resistance to Adverse Weather Conditions
The error-free start-up of automation systems, for example, after a power outage, can be critical at very low temperatures. The WAGO-I/O-SYSTEM 750 XTR succeeds even at a frosty -40°C, and doesn’t even require pre-warming. At the other end of the temperature scale: it is easy to reach +70°C when a control cabinet is placed in direct sunlight. Even in this case, the XTR version of the I/O system appears unimpressed.
Extreme Isolation and Resistance to Interference
With an increased impulse-voltage withstand, according to EN 60870-2-1, of up to 1 kV (< 60 V, class VW1) and 5 kV (>= 60 V, class VW3), the WAGO-I/O-SYSTEM 750 XTR ensures continuous, Sea-Worthy GL for the WAGO-I/O-SYSTEM 750 XTR Certified safe and reliable: with approvals from KC, UL508, and, in particular, GL, the WAGO-I/O-SYSTEM 750 XTR is well equipped for applications in the maritime industry. smooth operation because the electronics are protected against malfunctions. The optimized EMC behavior also prevents negative electromagnetic interference emissions, which thus enables its use even in direct proximity to highly sensitive third-party systems. This allows complete satisfaction of demands regarding dielectric strength and EMC interference immunity, including requirements posed by telecontrol devices and for use on the bridge of ships in close proximity to the compass (“Compass” certification from BSH).
Extreme Vibration Resistance up to 5g Acceleration
Increased vibration- and shock-resistance are required, particularly when the modules are located in direct proximity to high performance maritime diesel engines or power circuit breakers. With a vibration resistance of 5g, which corresponds to an acceleration of 50 m/s², and a resistance to continuous shocks of 25g, the WAGO-I/O-SYSTEM 750 XTR has set the bar high.
Extreme Flexibility in Use
The automation system is based on the proven WAGO-I/OSYSTEM, and thus profits from all of its positive features. The XTR retains the especially compact construction, finely modular and fieldbus- independent design, and the extremely flexible potential for applications. With approvals from KC, UL508, and, in particular, GL, the WAGO-I/O-SYSTEM 750 XTR is well equipped for applications in the maritime industry. Other approvals will follow.